Promat International Asia Pacific

Applications

Structural Steel

Partitions &
External Walls

Ceilings & Floors

Ductwork

E&M Services Enclosures

Cavity &
Smoke Barriers

Access Panels &
Hatches

Tunnel Fire Protection

Concrete Upgrading

Penetration Seals

PROMASEAL^® PROMASTOP^®

Conduit Collar Retrofit Collar (Square base) Retrofit Collar (Circular base) Wall Collar Hi-Blu Collar Green Cast-in Collar Floor Waste Collar (Cast-in) Floor Waste Collar (Retrofit) Fire Resistant Services Seal Collar PromaSnap® Floor Waste System AN Acrylic Sealant Bulkhead Sealer System FyreStrip FlexiWrap IBS™ Electrical Junction Seal Mortar Pillows Switchbox Intumescent

For floors and walls

	With up to 240 minutes fire resistance
	Integrity & Insulation
	Tested to BS476: Part 20 & AS1530: Part 4 requirement

PROMASEAL^® Mortar

Areas of
Application

Stability
Rating

Integrity
Rating

Insulation
Rating

Floor

240 minutes

180 minutes *

Wall

240 minutes

240 minutes *

* The insulation time is the time to failure measured on the surface of the PROMASEAL® Mortar. In some instances, where insulation measured upon the services is the required criteria, this time to insulation failure can be substantially shorter, e.g. for a steel or copper pipe passing through the barrier. If insulation measured upon the services is the relevant criteria for a specific project, please consult Promat Technical Department to ensure the appropriate performance can be obtained.

PROMASEAL® Mortar (floor)

PROMASEAL® Mortar

PROMASEAL® Mortar (SM) is a specially formulated, lightweight (density approximately 700kg/m³), hydraulic cement composition supplied as a premixed dry powder. It can be troweled into position for sealing of openings required for the passage of services such as electrical cables/pipes, busways and busbars, telecommunication cables/conduits etc. through floors and walls, thus maintaining the fire resistance of building elements that have been penetrated. It can also be used to seal openings after services have been removed or where no services are present.

PROMASEAL® Mortar has been successfully tested and assessed to AS1530: Part 4 and BS476: Part 20 for fire ratings up to 240 minutes depending on service penetration. Insulation criteria will vary depending upon the penetrating services.

PROMASEAL® Mortar is grey in colour and is packaged in convenient 20kg bags. It can be mixed with varying quantities of clean water for different consistencies.

Recommended Specification

Where appropriate, with or without service penetrations, the specified floor/wall openings should be properly fire stopped using PROMASEAL® Mortar capable of providing fire resistance of -/240/- when tested and assessed in accordance with AS1530: Part 4: 2005 and/or BS476: Part 20: 1987. Installation of any fire stopping product should be carried out according to the manufacturer’s recommendations. Please consult Promat for more details.

Download full application details in PDF file.



	© Copyright 2010 Promat International (Asia Pacific) Ltd. All rights reserved.