PromaSnap® Floor Waste System

ADVANTAGES

Fire Resistant Collar for Plastic Pipes Penetration Seals

Floor wastes in wet areas are notoriously difficult to seal in the event of a fire. The lack of a pipe stack above the floor level means that the floor grate offers little protection from fire and smoke once the pipe work has burnt through. The PromaSnap® Floor Waste System is designed to provide an effective but simple solution for water proofing and the leveling of the screed for tiling and water flow from the floor.

PromaSnap® Floor Waste System is comprised of:
  1. An outer cap that will keep concrete, water and rubbish out of the pipe work during construction. This cap is positioned flush with the finished floor slab to eliminate any trip hazard and enable the slab to be floated off, obstacle free.
  2. A central core (with a cap) that can be adjusted to the correct screed height for the finished (tiled) floor.
  3. A puddle flange that can be set at the exact height of the finished slab.
  4. A base that will hold the pipe in place during a concrete floor slab pour.

PromaSnap® Floor Waste System, with its built-in puddle flange, providing the installer optimum conditions to work with a waterproofing membrane.

Dimension
< #Back#

DIMENSION

Code no.   PPS 100
uPVC pipe nominal diameter mm 100
Body H mm 78
D1 mm 110
D2 mm 163
Flange D3 mm 210

 

PromaSnap® Floor Waste System are manufactured under a quality management system certified in accordance with ISO 9001: 2008. The production unit has passed the site audit of ISO 14001 and all manufacturing processes are in accordance with the environmental standards of ISO 14001: 2004 and the safety standards of AS 4801: 2001. PromaSnap® Floor Waste System is manufactured entirely from recycled and recyclable materials, and is certified under WaterMark™ Certification Scheme.

DIMENSION

Code no.   PPS 100
uPVC pipe nominal diameter mm 100
Body H mm 78
D1 mm 110
D2 mm 163
Flange D3 mm 210

 

PromaSnap® Floor Waste System are manufactured under a quality management system certified in accordance with ISO 9001: 2008. The production unit has passed the site audit of ISO 14001 and all manufacturing processes are in accordance with the environmental standards of ISO 14001: 2004 and the safety standards of AS 4801: 2001. PromaSnap® Floor Waste System is manufactured entirely from recycled and recyclable materials, and is certified under WaterMark™ Certification Scheme.

Health & Safety
< #Back#

HEALTH & SAFETY

No special precautions are required. However, to avoid potential for fibre generation exists, please wear appropriate personal protection gear (safety goggles, protective clothing and dust mask). For more information please check the material safety data sheet, available upon request.

 

WASTE DISPOSAL

Handle as construction industry waste and dispose of in compliance with all local and national regulations in the appropriate and approved manner.

HEALTH & SAFETY

No special precautions are required. However, to avoid potential for fibre generation exists, please wear appropriate personal protection gear (safety goggles, protective clothing and dust mask). For more information please check the material safety data sheet, available upon request.

 

WASTE DISPOSAL

Handle as construction industry waste and dispose of in compliance with all local and national regulations in the appropriate and approved manner.

Documents
< #Back#

Application & Technical Manual

Promat Asia Pacific Handbook

Application & Technical Manual

Promat Asia Pacific Handbook