PROMASEAL® Mortar

ADVANTAGES

  • Clean and economical.
  • The mortar weighs approximately 700kg per m³ as compared to 2400kg of normal concrete and 1600-1800kg of lightweight concrete.
  • Quick setting time in a few hours depending on ambient weather conditions.
  • Easy to create new holes for installation of new penetrating services and equally easy to repair.
  • Does not shrink on drying.
  • Can be installed at the last minute before inspection time or after all services are installed.
  • Comparatively more versatile and flexible to install, and more compatible with other Promat fire stopping systems.

Fire Resistant Lightweight Cement Powder

PROMASEAL® Mortar is a lightweight, fire resistant, cement based product, supplied as a pre-mixed, grey powder to which water is added. It has been tested up to a 240 minute fire resistance with various penetration seals in concrete/masonry floors and walls (with an equal or greater fire resistance level).

Handling
< #Back#

HANDLING

Packaging Storage Shelf life Environmental
20kg bags Kept dry and off the ground until ready for use Maximum 10 months in original sealed containers Do not discharge into drains, watercourses or soil.

 

PROMASEAL® Mortar are manufactured under a quality management system certified in accordance with ISO 9001: 2008. The production unit has passed the site audit of ISO 14001 and all manufacturing processes are in accordance with the environmental standards of ISO 14001: 2004 and the safety standards of AS 4801: 2001.

HANDLING

Packaging Storage Shelf life Environmental
20kg bags Kept dry and off the ground until ready for use Maximum 10 months in original sealed containers Do not discharge into drains, watercourses or soil.

 

PROMASEAL® Mortar are manufactured under a quality management system certified in accordance with ISO 9001: 2008. The production unit has passed the site audit of ISO 14001 and all manufacturing processes are in accordance with the environmental standards of ISO 14001: 2004 and the safety standards of AS 4801: 2001.

Health & Safety
< #Back#

HEALTH & SAFETY

No special precautions are required. However, to avoid potential for fibre generation exists, please wear appropriate personal protection gear (safety goggles, protective clothing and dust mask). For more information please check the material safety data sheet, available upon request.

 

WASTE DISPOSAL

Handle as construction industry waste and dispose of in compliance with all local and national regulations in the appropriate and approved manner.

HEALTH & SAFETY

No special precautions are required. However, to avoid potential for fibre generation exists, please wear appropriate personal protection gear (safety goggles, protective clothing and dust mask). For more information please check the material safety data sheet, available upon request.

 

WASTE DISPOSAL

Handle as construction industry waste and dispose of in compliance with all local and national regulations in the appropriate and approved manner.

Documents
< #Back#

Application & Technical Manual

Promat Asia Pacific Handbook

Application & Technical Manual

Promat Asia Pacific Handbook