PROMASEAL® Bulkhead Sealer System

ADVANTAGES

Coated High Density Mineral Wool

PROMASEAL® Bulkhead Sealer System is made using high density mineral wool that is coated with PROMASEAL® Bulkhead Sealer. The coated mineral wool remains in-situ during a fire situation and forms a barrier against the passage of flame, smoke and toxic gases.

The system is the simplest of all fire stopping products to install. It is also one of, if not the most economical product to use. It can be installed in both concrete/masonry floors and walls (with an equal or greater fire resistance level) and has been tested up to 120 minutes with various penetrating applications.

In many buildings, power cables (e.g. information technology and telecommunication services) are continuously added, altered and removed. PROMASEAL® Bulkhead Sealer System enables this process to be carried out with the minimum of mess and inconvenience.

PROMASEAL® Bulkhead Sealer Systems are non loadbearing. Please consult Promat for loadbearing PROMASEAL® Bulkhead Sealer Systems.

handling
< #Back#

HANDLING

Packaging Storage Shelf life Environmental
25kg containers or as pre-coated batts measuring 1200mm x 600mm
  • Indoors in dry conditions between 10°C and 38°C.
  • Protect from frost, excessive heat (above 45ºC) and strong radiant sunlight.
Maximum 10 months in original sealed containers Do not discharge into drains, watercourses or soil.

 

PROMASEAL® Bulkhead Sealer are manufactured under a quality management system certified in accordance with ISO 9001: 2008. The production unit has passed the site audit of ISO 14001 and all manufacturing processes are in accordance with the environmental standards of ISO 14001: 2004 and the safety standards of AS 4801: 2001.

HANDLING

Packaging Storage Shelf life Environmental
25kg containers or as pre-coated batts measuring 1200mm x 600mm
  • Indoors in dry conditions between 10°C and 38°C.
  • Protect from frost, excessive heat (above 45ºC) and strong radiant sunlight.
Maximum 10 months in original sealed containers Do not discharge into drains, watercourses or soil.

 

PROMASEAL® Bulkhead Sealer are manufactured under a quality management system certified in accordance with ISO 9001: 2008. The production unit has passed the site audit of ISO 14001 and all manufacturing processes are in accordance with the environmental standards of ISO 14001: 2004 and the safety standards of AS 4801: 2001.

Health & Safety
< #Back#

HEALTH & SAFETY

No special precautions are required. However, to avoid potential for fibre generation exists, please wear appropriate personal protection gear (safety goggles, protective clothing and dust mask). For more information please check the material safety data sheet, available upon request.

 

WASTE DISPOSAL

Handle as construction industry waste and dispose of in compliance with all local and national regulations in the appropriate and approved manner.

HEALTH & SAFETY

No special precautions are required. However, to avoid potential for fibre generation exists, please wear appropriate personal protection gear (safety goggles, protective clothing and dust mask). For more information please check the material safety data sheet, available upon request.

 

WASTE DISPOSAL

Handle as construction industry waste and dispose of in compliance with all local and national regulations in the appropriate and approved manner.

Documents
< #Back#

Application & Technical Manual

Promat Asia Pacific Handbook

Application & Technical Manual

Promat Asia Pacific Handbook