Material Description
- CAFCO® Plastic Coated Galvanised Mesh
CAFCO® Plastic Coated Galvanised Mesh is a hexagonal mesh
wire netting “reverse twist”, galvanised after weaving and coated in blue plastic.
This netting is embedded in the fire protection coating.
Nominal wire diameter (d) is the diameter in mm to designate the wire.
Real wire diameter is the arithmetical mean of the minimum and maximum diameter, measured in the same section
of a straight piece of wire by mean of the minimum and maximum diameter.
|
|
 |
Nominal mesh size is the distance in mm to designate the mesh.
Real mesh size (a) is the distance in mm between the twists.
Material Description
– CAFCO® Helical CD Weld Pin
CAFCO® Helical CD Welded Pins are special stainless steel pins welded
to the substrate using an approved capacitance discharge weld machine incorporating a special Cafco supplied chuck.
The helical pins are used to retain the plastic coated galvanised retention/reinforcement mesh used in conjunction with the Cafco
FENDOLITE® MII system.
No clips are required.
Typical Mechanical Properties
– CAFCO® Helical CD Weld Pin
| Properties and performance |
|
| Material |
Stainless steel in accordance with AISI.316.S.11 |
| Dimensions |
| Wire diameter: |
2.20mm ± 0.01mm |
| |
|
| Headed flange diameter: |
4.72mm ± 0.03mm |
| |
|
| Headed flange thickness: |
0.079mm ± 0.02mm |
|
| Tensile strength |
Minimum 540N/mm˛ |
|
